Camper Vinyl Mold, how to remove?
by admin on Tuesday, May 31st, 2011 | 2 Comments
I have a pop-up camper where the vinyl picked up quite a bit of mold over the winter. How do I remove the mold? Is diluted bleach best? If so, at what proportion?
And how do I remove the mold from the inside of the vinyl?
diluted bleach should work best,1 cup bleach to a gallon of water.Also,go to the hardware store and ask for a large container of elbow grease as you will need a lot to scrub it down good.The clerks will get a laugh and you will make their day.I used the bleach/water trick on my vinyl siding and it takes the mold right off.
I just cleaned mine last weekend. All ya need is Clorox clean-up. Its in a spray bottle and you can pick it up anywhere. Just spray it on, let it sit for a few minutes. You’ll see it start working immediately. Wipe it down and use the hose to spray it clean. No measuring needed.
For the inside, don’t use the hose of course. Let the camper dry out completely before you close it down, if you don’t thats how you get the mold.